Bar Back Panel

From: $0.00

Clear
    Reset options

    Customisations

    These options change based on the selections you make above.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

SKU: PH.106 Category: Tag:

Description

  • Measurement – 1200x900x18mm
  • Measurement – 2400x900x18mm
  • Panel Substrate – E1 Panel Product (Melteca Superfine)
  • Panel Substrate – E0 Panel Product (Acrylic Customwood MDF)
  • For Grain Directional Colours, In Order To Have Vertical Grain You Must Order The 1200mm Size. Ordering A 2400mm Size Will Come As Horizontal Grain Direction.
  • The Image Shows The Barback Panel Fitted To The Rear Of A Series Or Cabinets. The Barback Panel Is Used On The Backs Of Islands And Anywhere Else That The Rear Is Visable. You Buy The Panel In A Length And Cut It To Suit Your Opening. It Is Combine With The Island End Panels, And You Run The Barback Panel In Between The Island End Panels.