Island End Panel

From: $0.00

Clear
    Reset options

    Customisations

    These options change based on the selections you make above.

    Select the nearest size range for your custom width.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

    Select the nearest size range for your custom width.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

    Select the nearest size range for your custom width.

    Enter a custom width in millimetres (mm).
    The width must be within the selected size range.

SKU: PH.103 Category: Tag:

Description

  • Measurement – 900x610x18mm
  • Measurement – 900x900x18mm
  • Measurement – 900x962x18mm
  • Panel Substrate – E1 Panel Product (Melteca Superfine)
  • Panel Substrate – E0 Panel Product (Acrylic Customwood MDF)
  • The Image Shows How A Base End Panel Is Used To Cover The Side Of A Base Cabinet. The Second Image Shows The Cabinet Without The Base End Panel
  • A 610mm Island End Is Used For An Island Of One Depth Of Cabinets. A 900mm Island End Is Used For An Island Of One Depth Of Cabinets, With The Rear Sticking Further Out To Enclose The Space. A 962mm Island Will Take A Wall Cabinet, Stacked On The Rear Of The Standard Base Cabinets, To Give You A Two Sided Island. Note If You Are Doing This Please Add Notes To The Wall Cabinets Ordered, To Ensure We Cut The Doors To The Appropriate Length.